A grey panel is the quiet option: it knocks down glare and surface heat without turning the space under it into a dark box, and it sits neutrally against concrete, steel and paving. This one arrives finished — reinforced hem on all four sides, aluminium eyelets along the edge, reinforced corners — so it goes straight onto a frame, a carport or a greenhouse roof with ropes, hooks or cable ties.
Grey reflects the visible glare that makes a parked car uncomfortable to get back into and keeps the paving below noticeably cooler. Because the panels are cut to size, a car park can be covered bay by bay, with each panel tied to its own posts and eyelets sharing the load.
On a glasshouse or polytunnel roof, grey takes the edge off midday sun without the heavy shade of a darker colour. Rain still passes through the mesh, so the panel does not sag under water and does not need re-tensioning after every storm.
Fixed between the house wall and a post, one panel turns an exposed terrace into usable space. The hem carries the tension, so the panel can be pulled tight and left up for the season instead of being taken down every time the wind picks up.

Detail: grey knitted mesh, stitched webbing hem and set aluminium eyelet.
| Material | PE (polyethylene) knitted net |
| Colour | Light grey fabric with grey-brown webbing hem |
| Edge finish | Reinforced hem, double stitched, all four sides |
| Corners | Folded triangular reinforcement at each corner |
| Hardware | Aluminium eyelets set through the hem |
| Shade rate | Customizable to your requirement |
| Fabric weight | Customizable to your requirement |
| Eyelet spacing | Customizable to your requirement |
| Width / Length | Customizable up to our maximum width and length |
Send the finished size you need — the width between your posts, the length of the run, and whether the eyelets should sit every half metre or further apart. We produce the panel to that measurement, so there is no cutting, hemming or punching on site.

In use: grey panels over a commercial nursery, tied down through the hem eyelets.
Thread rope, shock cord or cable ties through the eyelets and pull the panel evenly from opposite corners. Because the eyelets sit in a stitched hem rather than a raw edge, the load spreads along the hem instead of tearing at one hole.
Yes. Both the width and the length are cut and hemmed to the size you specify, up to our maximum width and length, and the eyelet spacing is set at the same time.
No — the knitted mesh is open, so rain and air pass through. That is what keeps the panel light and stops water pooling on top.
Send the panel size (width × length), the shade rate you want, the eyelet spacing and your destination port, and we will reply with a quotation and a production schedule. Samples for checking mesh, hem and eyelet quality can be sent before a bulk order.
Grey PE shade net reflects part of the incoming light instead of absorbing it, so the area underneath stays brighter while still being cooler than in direct sun. With a sewn hem and eyelets it arrives as a finished panel ready to fix to any frame.
RELATED
RELATED
RELATED
RELATED
Binzhou Taituo Import and Export Co., Ltd
Add: Binzhou, Shandong, China
Tel: +86 19954368176
E-mail: 961336486@qq.com
Copyright © 2026 Binzhou Taituo Import and Export Co., Ltd.
Sitemap
This website uses cookies to ensure you get the best experience on our website.