Products
Home > Products > Shade Sail > Grey HDPE Shade Sail, Quadrilateral and Triangle

Grey HDPE Shade Sail, Quadrilateral and Triangle

Grey HDPE Shade Sail, Quadrilateral and Triangle

    Grey HDPE Shade Sail, Quadrilateral and Triangle

    Grey HDPE Shade Sail for Modern BuildingsGrey disappears into concrete, render and glass, which is why it is the colour most often specified for contemporary houses and commercial courtyards. The fabric is HDPE knitted mesh: open enough to let wind and rain through, dense enough to cut the glare that makes a terrace unusable at midday. Sails are made to order in quadrilateral or triangle form.Why Grey WorksA neutral sail for rendered and concrete facadesAgainst pale walls a grey panel reads as part of the building rather than an addition. It reflects part of the light instead of absorbing it,....
  • Share:
  • Contact us Inquiry

Grey HDPE shade sail for Modern Buildings

Grey disappears into concrete, render and glass, which is why it is the colour most often specified for contemporary houses and commercial courtyards. The fabric is HDPE knitted mesh: open enough to let wind and rain through, dense enough to cut the glare that makes a terrace unusable at midday. Sails are made to order in quadrilateral or triangle form.

Why Grey Works

A neutral sail for rendered and concrete facades

Against pale walls a grey panel reads as part of the building rather than an addition. It reflects part of the light instead of absorbing it, so the fabric itself stays cooler than a dark sail in the same position.

Quadrilateral sails for car parks and long spans

Four-sided sails cover rectangular bays efficiently — one panel per two parking bays, or a run of panels down a driveway. Because each is cut to size, the row lines up with the columns instead of being trimmed on site.

Triangle sails for corners and stairwells

Where only three anchor points exist, a triangular sail fills the gap without a fourth mast. The D-ring corners take tensioned wire, so the panel can be pulled tight from all three sides.

Grey HDPE shade sail corner with stainless steel D-ring
Detail: stainless steel D-ring set in a webbing loop, with the stitched hem.

Grey HDPE shade sail installed over a terrace
In use: grey sails over a private villa terrace and pool.

Specifications

MaterialHDPE (high-density polyethylene) knitted mesh
ShapeQuadrilateral (square or rectangle) or triangle
SizeMade to your measurements
CornersWebbing loop with stainless steel D-ring
HemReinforced, double stitched, all edges
ColourGrey
RainOpen mesh — water and air pass through

Common Questions

What size shade sail do I need for a patio?

Measure the distance between the fixing points, not the open area, then allow a slight rise in the middle for tension. Send those measurements and we produce the sail to suit.

Can a grey shade sail be fixed to a wall on one side only?

Yes — two corners on the wall, the remaining corner or corners on posts. The wall fixings carry the same D-rings as the posts, so the load is shared.

Does an HDPE shade sail fade?

The fabric is a pigmented HDPE mesh rather than a coated cloth, so the colour is through the yarn and the surface does not peel or flake. Any textile outdoors will shift slightly over years of sun; the structure of the sail does not depend on the coating.

Request a Quotation

Send the shape, the fixing-point dimensions, the quantity and your destination port. We will reply with a price and production schedule, and can supply a fabric and hardware sample before a bulk order.

ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

Binzhou · Shandong · China

Binzhou Taituo Import and Export Co., Ltd

Contact Us

Add: Binzhou, Shandong, China
Tel: +86 19954368176
E-mail: 961336486@qq.com

Copyright © 2026 Binzhou Taituo Import and Export Co., Ltd.

Sitemap
chat

Online Customer Service

×

This website uses cookies to ensure you get the best experience on our website.

Accept Reject